Wang, B. Sharma, D. Lin, S. Lei, 3D Printing of Cellulose Aerogels for Acoustic Applications (under preparation).
Vongsiri, M.J. Carrillo-Munoz, B. Sharma, Magic Phononic Structures (under preparation).
Johnston, P. Godakawela, B. Sharma, S. Keshavanarayana, M. Drouin, Multifunctional Fibrous Porous Structures for Simultaneous Energy and Noise Absorption Performance (under preparation).
J. Carrillo-Munoz, S. Keattitorn, B. Sharma, Bandgap Generation in Triply Periodic Minimal Surface Structures via Symmetry Breaking (under preparation).
J. Carrillo-Munoz, S. Keattitorn, B. Sharma, Anomalous Wave Propagation Behavior Geometrically Asymmetric Triply Periodic Minimal Surface Derived Structures (under preparation).
J. Carrillo-Munoz, B. Sharma, A New Method for Elastic Wave Polarization Identification (Under submission).
Dasyam, Y. Xue, J. Bolton, B. Sharma, Effect of Particle Size on Sound Absorption Behavior of Granular Aerogel Agglomerates, Journal of Non-Crystalline Solids, 598, 121942.
Xue, E. Sanchez-Torres, B. Sharma, J. Bolton, Tunable sound packages consisting of granular aerogels and fibrous media, Noise Control Engineering Journal, 70, no. 5 (2022): 406-415.
Lomte, B. Sharma, M. Drouin, D. Schaffarzick, Sound Absorption and Transmission Loss Properties of Open-Celled Aluminum Foams with Stepwise Relative Density Gradients, Applied Acoustics, 193, 108780.
Johnston, B. Sharma, Additive Manufacturing of Fibrous Sound Absorbers, Additive Manufacturing, 41 (2021) 101984.
Sharma, S.A. Kijewski, L.S. Fifield, Y. Shin, C.L. Tucker, M.D. Sangid, Reliability in the characterization of fiber length distributions of injection molded long carbon fiber composites, Polymer Composites, 39 (2018) 4594-4604.
Sharma, D. Naragani, B.N. Nguyen, C.L. Tucker, M.D. Sangid, Uncertainty quantification of fiber orientation distribution measurements for long-fiber-reinforced thermoplastic composites, Journal of Composite Materials, 52 (2018) 1781-1797.
Sharma, C. Sun, Impact load mitigation in sandwich beams using local resonators, Journal of Sandwich Structures & Materials, 18 (2016) 50-64.
Sharma, C. Sun, Local resonance and Bragg bandgaps in sandwich beams containing periodically inserted resonators, Journal of Sound and Vibration, 364 (2016) 133-146.
Chen, B. Sharma, C. Sun, Dynamic behaviour of sandwich structure containing spring-mass resonators, Composite Structures, 93 (2011) 2120-2125.
Conference Proceedings (Peer Reviewed)
Johnston, Y. Xue, B. Sharma, J.S. Bolton, Programmable Sound Absorption Performance Enabled by 3D Printed Fibers, NOVEM Proceedings, 2023 (Accepted).
Johnston, M. Brown, M. Jones, B. Sharma, Comparing Acoustic Prediction Methods for Additively Manufactured Porous Structures, NOVEM Proceedings, 2023 (Accepted).
Mahajan, A. Lomte, W. Johnston, B. Sharma, Surrogate Modeling of Open-Celled Metal Foam Sound Absorbers with Stepwise Property Gradients, In INTER-NOISE and NOISE-CON Congress and Conference Proceedings (Vol. 264, No. 1, pp. 567-576). Institute of Noise Control Engineering, 2022.
Lomte, B. Sharma, Modeling the Acoustic Behavior of Stepwise Gradient Porous Structures, In INTER-NOISE and NOISE-CON Congress and Conference Proceedings (Vol. 264, No. 1, pp. 500-508). Institute of Noise Control Engineering, 2022.
Drouin, B. Sharma, Experimental Investigations on the Acoustical Performance of Open-Celled Metal Foams under Grazing Flow, In INTER-NOISE and NOISE-CON Congress and Conference Proceedings (Vol. 264, No. 1, pp. 58-68). Institute of Noise Control Engineering, 2022.
Nevarez-Saenz, T. Adler, W. Wei, B. Sharma, Additive Manufacturing of Porous Ceramic Structures for Acoustical Applications, In INTER-NOISE and NOISE-CON Congress and Conference Proceedings (Vol. 264, No. 1, pp. 560-566). Institute of Noise Control Engineering, 2022.
Johnston, P. Kankanamalage, B. Sharma, 3D Printed Multifunctional Low-Frequency Sound Absorbers, 3D printed multifunctional, load-bearing, low-frequency sound absorbers, INTER-NOISE and NOISE-CON Congress and Conference Proceedings. Vol. 263. No. 1. Institute of Noise Control Engineering, 2021.
Xue, A. Dasyam, J. Bolton, B. Sharma, Low-frequency Noise Control Using Layered Granular Aerogel and Limp Porous Media, INTER-NOISE and NOISE-CON Congress and Conference Proceedings. Vol. 263. No. 4. Institute of Noise Control Engineering, 2021.
Lomte, B. Wojciechowski, B. Sharma, A Comparison of the Two And Four Microphone Methods for Deriving the Characteristic Acoustic Properties of Porous Materials. INTER-NOISE and NOISE-CON Congress and Conference Proceedings. Vol. 261, No. 2, pp. 4111-4122. Institute of Noise Control Engineering, 2021
Dasyam, O. Khaleel, B. Sharma, Acoustic Absorption Properties of Granular Silica Aerogels, INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 261, No. 6, pp. 48-58. Institute of Noise Control Engineering, 2020.
Dasyam, B. Sharma, G. Yang, D. Lin, S. Lei, Design and 3D Printing of Aerogel-based Ultra-lightweight Sound Absorbers, INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 262, No. 1, pp. 309-314. Institute of Noise Control Engineering, 2020.
Lomte, B. Sharma, J. Puppo, D. Schaffarzick, Acoustic Properties of Open-Celled Metal Foams with a Step-Wise Pore Size Gradients, INTER-NOISE and NOISE-CON Congress and Conference Proceedings. Vol. 262. No. 1. Institute of Noise Control Engineering, 2020.
Bhavsar, B. Sharma, W. Moscoso-Kingsley, V. Madhavan, Detecting First Layer Bond Quality During FDM 3D Printing Using a Discrete Wavelet Energy Approach, Procedia Manufacturing, 48, pp.718-724, 2020.
Wojciechowski, K. Wetter, C. Cheepa, B. Sharma, Acoustic Properties of 3D Printed Bulk Absorbers with Novel Surface Topologies, INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Vol. 260, No. 1, pp. 565-572. Institute of Noise Control Engineering, 2019.
Shelts, L. Peterson, D. Wevita, B. Sharma, D. Schaffarzick, J. Puppo, Characterizing the Relationship between Microstructural and Acoustic Properties of Open-Celled Metal Foams, INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Institute of Noise Control Engineering, pp. 598-603, 2019.
Sharma, R.V. Harikrishnan, S.B. McCrorie, M.C. Conner, M. Salahshoor, A.V. Deshmukh, M.D. Sangid, Incorporation of Physics-based Machining Models in Real-time Decision Making via Metamodels, Procedia Manufacturing, 10, 1109-1117, 2017
F. Agyei, B. Sharma, M. Sangid, Investigating Sub-surface Microstructure in Fiber Reinforced Polymer Composites via X-ray Tomography Characterization, 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, pp. 0409, 2016.
Wang, B.N. Nguyen, R. Mathur, B. Sharma, M.D. Sangid, F. Costa, X. Jin, C.L. Tucker III, L.S. Fifield, Fiber Orientation in Injection Molded Long Carbon Fiber Thermoplastic Composites, Composites, 6, 2015.
S. Chen, B. Sharma, C.T. Sun, Sandwich structure containing resonators, Proceedings of 9th International Conference on Sandwich Structures, 2010.
Conference Presentations (without proceedings)
Vongsiri, M. Carrillo-Munoz, B. Sharma, Magic Phononic Structures, ASME International Mechanical Engineering Conference and Exposition, November 2022.
Carrillo-Munoz, S. Keattitorn, B. Sharma, Anomalous Polarization in Triply Periodic Minimal Derived Surface Lattices, ASME International Mechanical Engineering Conference and Exposition, November 2022.
Johnston, J. Godakawela, C. Gatti, B. Sharma, S. Keshavanarayana, Simultaenous Acoustic and Mechanical Energy Absorption via 3D Printed Fibrous Triply Periodic Minimal Surface Structures, ASME International Mechanical Engineering Conference and Exposition, November 2022.
Lomte, B. Sharma, D. Schaffarzick, M. Drouin, Acoustical Properties of Open-Celled Aluminum Foams with Stepwise Relative Density Gradients, ASME International Mechanical Engineering Conference and Exposition, November 2022.
Johnston, J. Godakawela, C. Gatti, S. Keshavanarayana, B. Sharma, 3D Printed Fibrous Cellular Multifunctional Structures, Materials Science & Technology Technical Meeting, October 2022.
Dasyam, Y. Xue, B. Sharma, J.S. Bolton, Acoustical Properties of Granular Aerogel Agglomerates, Annual Meeting of the Acoustical Society of America, May 2022.
Keattitorn, M. Carrillo-Munoz, B. Sharma, Anomalous Polarization in Asymmetric Gyroid Structures, Annual Meeting of the Acoustical Society of America, May 2022.
Yang, B. Sharma, D. Lin, S. Lei, Aerogel-based Ultilight Noise Absorbers Fabricated using 3D Freeze Printing, Annual Meeting of the Acoustical Society of America, May 2022.
Wojciechowski, B. Sharma, Sound Absorption Properties of Spinodoid Structures with Spatially Varying Properties, Annual Meeting of the Acoustical Society of America, May 2022.
Vongsiri, M. Carrillo-Munoz, B. Sharma, Magic Phononic Structures, The Journal of the Acoustical Society of America, 150(4), pp.A148-A148, 2021.
Wojciechowski, B. Sharma, Acoustical Properties of Spinodoid Porous Structures, The Journal of the Acoustical Society of America 150 (4), A148-A148, 2021.
Johnston, P. Kankanamalage, S. Pathak, M. Drouin, B. Sharma, 3D printed fibrous porous structures with enhanced noise reduction properties, The Journal of the Acoustical Society of America, 150(4), pp.A308-A308, 2021.
Lomte, M. Mahajan, B. Sharma, Optimized Metal Foam Liners with Spatially Gradient Properties for Aircraft Engine Noise Reduction, The Journal of the Acoustical Society of America, 150(4), pp.A213-A213, 2021.
Nevarez-Saenz, T. Adler, B. Sharma, W. Wei, Additive Manufacturing of Architected Ceramics Foam for Noise Reduction, The Journal of the Acoustical Society of America, 150(4), pp.A308-A308, 2021.
Carrillo-Munoz, S. Keattitorn, B. Sharma, Engineering Bandgaps in TPMS Structures by Breaking Their Underlying Symmetries, The Journal of the Acoustical Society of America, 150(4), pp.A148-A148, 2021.
Nevarez-Saenz, T. Adler, B. Sharma, W. Wei, 3D Printed Ceramic Acoustic Liners for Aircraft Noise Reduction, Materials Science & Technology Technical Meeting and Exhibition, 2021.
Vongsiri, M. Carrillo-Munoz, B. Sharma, Dynamic Behavior of a Spring-Mass Magic Square System, Engineering Mechanics Institute Conference 2021, Minnesota, 2021
Xue, A. Dasyam, J. Bolton, B. Sharma, Acoustical Investigation of Aerogel Granules Modeled as a Layer of Poroelastic Material, Symposium on the Acoustics of Poro-Elastic Materials (SAPEM) 2020+1, West Lafayette, IN, 2021.
Carrillo-Munoz, N. Caceres, S. Keattitorn, B. Sharma, Elastic Wave Propagation in Structures with Triply Periodic Minimal Surfaces, The Journal of the Acoustical Society of America, 148 (2020) 2578-2578.
Ignacy Muthu, M. Carrillo-Munoz, B. Sharma, Elastic Wave Propagation in Self-Similar and Non-Self-Similar Hierarchical Two-Dimensional Square Lattices, The Journal of the Acoustical Society of America, 148 (2020) 2578-2578.
Sharma, D. Lin, A. Dasyam, G. Yang, Aerogel Two Ways: Towards Ultralight Noise Absorbers, The Journal of the Acoustical Society of America, 148 (2020) 2455-2455.
Sharma, K. Wetter, W. Johnston, 3-D Printed Bulk Absorbers, The Journal of the Acoustical Society of America, 148 (2020) 2457-2457.
Carrillo-Munoz, B. Sharma, Identifying Elastic Wave Attenuation Bandgaps: Does Sweeping the Wave Vector Over the Irreducible Brillouin Zone Boundaries Provide the Complete Picture?, Virtual Technical Meeting of the Society of Engineering Science (2020).
Carrillo-Munoz, B. Sharma, Wave Mode Identification and Classification in Periodic Structures, International Mechanical Engineering Congress and Exposition, ASME, November 11-14, 2019, Salt Lake City, Utah.
Sharma, C. Sun, Design of Acoustic Filters Using Acoustic and Elastic Resonators, International Mechanical Engineering Congress and Exposition, ASME, 2011, pp. 961-962.
Invited Talks
Sharma, Tailoring structural performance through additive manufacturing, Graduate Seminar Series at the Department of Mechanical and Aerospace Engineering at George Washington University, Scheduled: Spring 2023.
Sharma, Enabling Novel Porous Noise Absorbers via Additive Manufacturing, Materials Science & Technology Technical Meeting, October 2022.
Sharma, Leveraging additive techniques for designing multifunctional structures, College of Engineering Graduate Seminar Series at Kansas State University, September, 2022.
Sharma, Enabling structural multifunctionality through additive manufacturing, Industry and Defense Program and College of Engineering Seminar Series at WSU, May 2022.
Sharma, Surrogate Modeling of Open-Celled Metal Foam Sound Absorbers with Stepwise Property Gradients, NASA Glenn Research Center, Machine Learning Online Forum, April 2022.
Sharma, Keynote Talk: 3D Printed Sound Absorbers, Symposium on the Acoustics of Poro-Elastic Materials (SAPEM) 2020+1, Purdue University, 2021.